Thiết Bị Thu Âm IK Multimedia IRig Pro Quattro I/O Deluxe.
4-input professional field recording interface and mixer.
- Professional mobile recording interface/mixer
- For iPhone, iPad, Android, Mac/PC, standalone
- 24-bit, 96 kHz operation
- 4 x XLR / 1/4" mic, guitar, line in with phantom power
- 2 x RCA, 3.5 mm line in
- Built-in microphone
- 2 x balanced XLR outs
- Headphone out with direct monitoring
- Multitrack, stereo or mono operation
- Standalone mixer mode
- Built-in limiter & -12 dB safety mode
- USB, 9VDC or battery power
Thông số chi tiết.
Microphone Inputs 1-2
- 2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Input impedance: 1 kOhms
- Input level, min gain: 0 dBFS is obtained with a -1.5 dBu signal at the XLR input
- Input level, max gain: 0 dBFS is obtained with a -55 dBu signal at the XLR input
- Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
- Dynamic Range: 103 dB(A), min gain
- Phantom power: 48V / -4V
Built-in microphone
- Type: MEMS
- Polar pattern: omnidirectional
- Frequency response: from 30 Hz to 20 kHz
- Max SPL: 110 dBSPL
- Sensitivity: -41.5 dB (1 kHz, 94dB SPL)
Instrument Inputs 1-2
- 2 x unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
- Input impedance: 1 MOhms
- Input level, min gain: 0 dBFS is obtained with a +10 dBu signal at the TS input
- Input level, max gain: 0 dBFS is obtained with a -43 dBu signal at the TS input
- Frequency response: from 7 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
- Dynamic range: 103 dB(A), min gain
Microphone Inputs 3-4
- 2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Input impedance: 1 kOhms
- Input level, min gain: 0 dBFS is obtained with a -3 dBu signal at the XLR input
- Input level, max gain: 0 dBFS is obtained with a -54 dBu signal at the XLR input
- Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
- Dynamic range: 101 dB(A), min gain
- Phantom power: 48V / -4V
Line Inputs 3-4 (balanced)
- 2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Input impedance: 1 kOhms
- Input level, min gain: 0 dBFS is obtained with a -3 dBu signal at the XLR input
- Input level, max gain: 0 dBFS is obtained with a -54 dBu signal at the XLR input
- Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
- Dynamic range: 101 dB(A), min gain
- Phantom power: 48V / -4V
Line Inputs 3-4 (unbalanced)
- Unbalanced, TRS 3.5 mm stereo Jack and RCA
- Input impedance: 2.1 kOhms
- Nominal input level: -3.5 dBV (-10 dBV with 6.5 dB of headroom)
- Frequency response: from 16 Hz to 46 kHz within 3 dB (96 kHz sample rate)
- Dynamic range: 93 dB(A)
Line Outputs (balanced)
- 2 x balanced, 3-pin XLR, Pin 2: hot / Pin 3: cold / Pin 1: ground
- Floating balanced outputs with automatic level compensation when working in unbalanced mode
- Output impedance: 150 Ohms balanced
- Output level: 0 dBFS corresponds to +12 dBu
- Frequency response: from 5 Hz to 44 kHz within 3 dB (96 kHz sample rate)
- Dynamic range: 100 dB(A)
- Channels crosstalk: 88 dB(A)
Stereo Output (unbalanced)
- Unbalanced, TRS 3.5 mm stereo Jack
- Output impedance: 150 Ohms balanced
- Output level: 0 dBFS corresponds to +12 dBu
- Frequency response: from 5 Hz to 44 kHz within 3 dB (96 kHz sample rate)
- Dynamic range: 100 dB(A)
- Channels crosstalk: 88 dB(A)
Headphones Output
- TRS 3.5 mm stereo Jack
- Output impedance: 22 Ohm
- Output level: 26 mW/channel (32 Ohm load)
- Frequency response: from 15 Hz to 44 kHz within 3 dB (96 kHz sample rate)
- Dynamic range: 100 dB(A)
Common
- AD and DA Resolution: 24-bit
- Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
- Power: USB bus power, battery power (4 x AA), DC power supply (9VDC) or external USB power supply (5VDC, 1A min)
- Device Connection: Mini-DIN
- Size: 166 mm / 6.54″ x 92 mm / 3.62″ x 43 mm / 1.69″
- Weight: 325 g / 0.72 lb (batteries excluded)
- Battery Life:
• Recording - Max load*: 1 hours, 30 minutes (Alkaline); 3 hours (NiMH rechargeable)
• Playback - Min load**: 2 hours, 30 minutes (Alkaline); 4 hours (NiMH rechargeable)
*Max load condition: four inputs connected each to a 1.6mA phantom powered load, input gains set to maximum, 32 Ohm headphones connected.
**Min load condition is as follows: music playing, phantom power OFF, 32 Ohm headphones connected.
Dimensions
- Size: 166 mm / 6.54″ x 92 mm / 3.62″ x 43 mm / 1.69″
- Weight: 325 g / 0.72 lb (batteries excluded)
iRig Mic XY
- Type: Electret condenser
- Polar pattern: Cardioid
- Capsule size: 0.55”
- Frequency response: 20 Hz - 20kHz
- Sensitivity: -39 dB at 1kHz
- Equivalent noise: 22 dB (A-weighted)
- Max SPL: 145 dB SPL (@1% THD)
- Connector type: male 3-pin XLR
- Power requirements: 48V phantom power, <2mA (each)
- Dimensions (each): 55mm (H) x 19mm (Diam.)
- Weight (each): 37g
Package includes.
- iRig Pro Quattro I/O interface
- 1/4" thread adapter
- Lightning to Mini-DIN connection cable (60cm/23.62")
- USB-C to Mini-DIN connection cable (60cm/23.62")
- USB-A to Mini-DIN connection cable (60cm/23.62")
- 1x 2.5mm TRS male to MIDI female adapter (10cm/3.9")
- 4 x 1.5V AA Battery
- 2 x iRig Mic XY
- Windshield
- Power Supply Unit
- Carrying case
Compatibility.
- iOS Devices
- Computers
Mac®: Mac OS X 10.6 or later. One free USB port.
Windows®: Windows 10 or later. One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed.
- Android Devices
Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.
